Suitable for measurement and analysis of O2,CO,CO2,CH4,NO,NO2,NOx,SO2,H2S,H2

Product Applications

1.Exhaust Gas Analysis
2.Boiler Optimization
3.Environmental Monitoring
4.Service Testing

Product Features

The TRA880 is a versatile flue gas analyzer that is simple to operate, with an instrument protection rating of IP20. It is suitable for continuous monitoring of various combustion flue gas tests and emission tests. It can analyze and measure flue gas emissions from all types of fuels: liquid, solid, and gaseous. It can simultaneously measure O2, CO, CO2, CH4, NO, NO2, NOx, SO2,H2S, H2, flue gas temperature, ambient temperature, differential pressure, flow velocity, etc. It can calculate combustion efficiency, excess air coefficient, flue gas dew point, CO/CO2 ratio, mg/Nm³, NOx, reference oxygen ratio, exhaust heat loss.

Equipped with a powerful sampling pump, it operates normally even with a flue duct negative pressure of -20 kPa. The instrument has Bluetooth function, with a built-in powerful sampling pump featuring a suction capacity not less than -45 kPa, suitable for testing in high negative pressure environments.

The instrument is lightweight and portable, with a total weight of ≤5 kg (including the complete sampling system). It has a compact size for easy portability. A built-in rechargeable lithium battery provides a working time of not less than 15 hours when fully charged.

Color TFT display, high brightness, with LED backlight and measurement interface display magnification function. Measurement components and units can be switched directly on the operation interface. Graphical data representation. Capable of sending files in CSV or PDF format to a PC via USB or the Internet.

Excellent Pre-treatment and Preheating System of the Flue Gas Analyzer

• Equipped with a multi-stage flue gas particulate filter unit, effectively filtering dust and particles.
• The sampling probe part incorporates a primary filter element with a filtration grade of ≤10μm.
• A fine filter element is built into the front end of the main unit, with a filtration grade of ≤1μm.
• An ultra-fine filter element is built inside the instrument, with a filtration grade of ≤0.1μm.
• All filter elements are cleanable and reusable.
• Optimally designed cylindrical gas-water separator and threaded connection dust filter are built into the main unit, requiring no external connections. They can be removed for real-time observation of water content. The reusable Teflon filter can be replaced and cleaned at any time. Filtration efficiency ≥99.99%, temperature resistance ≥900°C.

Wide Measurement Range and Portable Design of the Flue Gas Analyzer

• Wide measurable gas range: Can simultaneously measure O2, CO, CO2, CH4, NO, NO2, NOx, SO2, H2,H2S
• The service life of O2, CO, NO, NO2, SO2, CO2, CH4,H2S,H2 sensors is not less than 4 years.
• Allows manual calibration of O2, CO, NO, NO2, SO2, CO2, CH4, H2S,H2 sensors. Allows manual automatic cross-interference correction for O2, CO, NO, NO2, SO2, CO2, CH4, H2S, H2 sensors. Calibration can be performed by adjusting coefficients or automatically by inputting calibration gas concentration.
• Continuous measurement and display of all flue gas concentrations, calculated values, flue gas temperature, ambient temperature, and flow rate.
• Viton material sampling line length not less than 3 meters. Alloy steel sampling probe length not less than 1 meter, capable of measuring flue gas temperature up to 1200°C. The probe features a front-mounted filter to effectively filter impurities. The front-mounted filter size is not less than 3075mm.

Easy Operation and High Degree of Automation of the Flue Gas Analyzer

• Integrated unit structure. The sampling system connects directly to the analyzer main unit. The main unit directly measures and displays the measurement components, requiring no separate hand-held controller.
• Full Chinese interface display menu, menu navigation software and function keys. The analyzer main unit display is a color TFT display with high brightness and measurement interface display magnification function. Measurement components and units (including ppm, mg/m³, etc.) can be switched directly on the operation interface. Reference oxygen values for different fuels can be set and adjusted.
• The instrument automatically draws fresh air for zero calibration upon startup. Manual zero calibration can be performed during the testing process.
• The instrument features a gas sampling channel seal leak detection function for real-time monitoring of instrument integrity. It can monitor the instrument’s condition at any time.
• The back of the instrument features a magnetic backplate, allowing it to be attached to operating platform equipment during on-site monitoring.
• A built-in flow sensor detects the sampling flow rate and automatically triggers an alarm if it is above or below the set value.
• Features sampling flow velocity monitoring function and Bluetooth transmission function.
• The instrument features a flue duct center positioning function and a dynamic red flame diagram for the flue center, facilitating the determination of the optimal sampling probe measurement point.
• The side of the instrument features a visible gas-water separation device with a built-in filter at the end. It is detachable and can be removed for real-time observation of water content.

Convenient Flue Gas Display and Operation Interface

• High brightness, with LED backlight and measurement interface display magnification function. Measurement components and units can be switched directly on the operation interface.
• Touch screen control for setting page content. Displayed measurement items can be interchanged arbitrarily. Multiple selectable and interchangeable measurement units (including ppm, mg/m³, etc.).

High-Temperature Resistant Probe of the Flue Gas Analyzer, Suitable for Various Environments

• Stainless steel flue gas extraction probe, glass gas regulation system, and high-quality pumps and motors.
• Ensures accurate results in various measurement environments. Available in multiple models for sampling probes: 800°C, 1000°C, 1200°C.

Easy Operation and Multiple Data Processing Methods of the Flue Gas Analyzer

• Data storage for not less than 10,000 sets. Data can be sent to a computer via a Mini-USB interface. It can also perform real-time data acquisition and upload to a PC via accompanying data transmission software. Includes supporting data curves and chart graphics for data analysis.
• Equipped with various data communication interfaces: WLAN, USB. All measurement results and calculation results can be printed.